Exterior Pine Clear 200L

Recommended Uses

EXTERIOR PINE CLEAR can be used wherever a clear protective exterior timber finish is required for treated pine e.g. cladding, decking, pergolas, trellis and fencing etc. It is suitable for all treated softwoods such as Radiata Pine and Slash Pine and Oregon.

Directions For Use

Apply EXTERIOR PINE CLEAR over dry surfaces, free from dirt, grease and wax. Previously varnished or painted surfaces must be thoroughly stripped. Badly weathered surfaces should be sanded back or cleaned using a suitable wood cleaner containing oxalic acid such as Preschem’s GREY DECK CLEANER or similar before application. Apply the oil via brush, roller, spray or dip application. Apply one generous coat of Exterior Pine Clear and allow a minimum of 24 hours drying time.

Maintenance

Timber treated with Exterior Pine Clear will not blacken when maintained regularly. However, over time and depending on the severity of exposure, the colour of the treated timber will fade. Repeat applications are simple as the timber can be re-oiled to bring back the timber texture. Areas which wear due to heavy foot traffic e.g. decks, doorways, steps, etc, can be touched up when necessary.

Coverage

(Dressed timber) approx. 10m²/Litre

(Rough sawn timber) approx. 6m²/Litre

Clean Up

Mineral turpentine.

Packaging

1,4,20 Litre cans. 200 Litre Drum

Safety Instructions

Avoid skin contact by wearing protective clothing. Don’t breathe vapour of spray mist.

First Aid Instructions

If poisoning occurs, contact a doctor or Poison Information Centre (13 11 26).
Eyes
Hold eyes open, flood with water for at least 15 minutes – see a doctor.
Skin
Remove contaminated clothing and wash skin thoroughly with soapy water.
Inhalation
Remove to fresh air.
If Swallowed
DO NOT induce vomiting. Give a glass of water to drink and transport to the hospital.